Bowl Gasket

Home > Uncategorized > Bowl Gasket

June 21st, 2004 admin

Bowl+Gasket

Instructions Of Cone Crusher Installation And Using by Huixia0010

What Is Cone Crusher Installation Process Like
(1) Before installing the crushing cone should be set near a solid, broken cone with higher a little wooden shelf as the installation.
(2) removed the reservoir protection applied to the shaft and the sphere and the wind net oil hole and oil groove.
(3) in the cone shaft surface coated with a layer of yellow dry oil sphere coated with a thin layer of oil.
(4) broken cone installation gently into the air eccentric shaft, secure in the spherical bowl bearing the bowl tile damage spherical ring contact to avoid.

The Cone Crusher Installation Instructions
(1) the range of application of this class of cone crusher can be widely used in metallurgical industry, construction industry, road building industry, chemical industry and phosphate industry, suitable for crushing hard and medium hard ore and rock. Such as iron ore, copper ore, limestone, quartz, granite, sandstone and so on.
(2) technical specifications and machine specifications 1200 standard medium-sized short head to the maximum size of the entrance to the mine mm 170 115 60

Install The General Instructions
(1) must be installed prior to inventory the number of parts. Inspection and removal of damage caused by the various parts machined surfaces and threaded in the loading and unloading, and get rid of the protective coating applied to the processing surface and handling Falling on dust and dirt in the packaging.
(2) Installation to the fixed contact on the surface coated with the dry oil, in the active surface coated with a thin oil.

Basic Of Cone Crusher
(1) crusher must be installed on a solid reinforced concrete on the basis of the depth of the user based on the local geological conditions.
(2) In order to avoid the accumulation of broken ore, the basis of the lower part there must be enough space to install the transport equipment.
(3) In order basis from damage in the basis of the upper part must cover shield, owned by the user.

Rack Installation
(1) install the rack should be kept strictly vertical and horizontal, in the centerline of the annular processing surface of the base level meter and check the base of netsuke (see Figure 2). (2) adjustment of the wedge adjust the base level, ground screw, tighten the second grouting.
(3) When the secondary grouting layer hardened to the base of the crusher and then remove the adjustment of the wedge, and cement filling this gap, and then rack installation

The Drive Shaft Installation
(1) install the drive shaft should be in the base with the flange between the flange of the drive shaft frame pad to adjust the pads.
(2) drive shaft load, using a model to check the size and the transmission gear.
(3) transmission gears axial movement for the 0.4-0.6mm (that is, both ends of the B gap).
(4) can be used in the demolition drive shaft before installation of the eccentric shaft of the drive shaft frame, air eccentric shaft on the flange installation empty first installed the gasket with the hook in the bottom cover the bottom of the case back in the rack, then use hook under a circular plate and circular plate installed in the order, the bottom cover, and bumps and bottom of the circular plate in the recess card.If you need to buy Iron Ore Mining Equipment, used cone crusher. We have cone crusher for sale.

About the Author

If you have any questions about crushers, please contact us.
We will reply you as soon as we can.If you need stone cone crushers or have any question.
You can navigate our website and contact with us through the free online service.
Our web: http://conecrusherforsale.com